PipeCast  Flex

Application Recommendations:

PipeCast™Flex for pipe casting system adheres extremely well to properly prepared metal, wood, concrete, fiber glass, and other various metal surfaces.

PipeCast™Flex must be applied through a two component, high pressure proportioning unit.

Mixing Instructions:

Agitate resin blend (B) component thoroughly with a drum mixer before use to disperse pigment and assure homogeneity. Do not thin. Do not agitate in air and moisture.

Consult a Technical Representative regarding specific metal/steel surface preparation and priming requirements. For concrete applications, we recommend PipeCast™Flex prime or PipeCastFlex CP.

Agitate resin blend (B) component thoroughly with a drum mixer before use to disperse pigment and assure homogeneity. Do not thin. Do not agitate in air and moisture.

Consult a Technical Representative regarding specific metal/steel surface preparation and priming requirements.

For concrete applications, we recommend PipeCast™ Flex prime  or PipeCast Flex CP.

PipeCast™Flex is available in 5 gallon pails, 55 gallon drums and 275 gallon totes. It should be stored in sealed containers at 60-90ºF. Shelf life is 12 months in factory sealed containers.

Safety

PipeCast™Flex is for industrial use only  Avoid contact with eyes and skin. Do not inhale or ingest. When spraying, wear a respirator or fresh air hood. Spraying indoors requires forced ventilation. Be sure to read SDS in its entirety prior to use.

Properties of components

PipeCastFlexProperty.png

Physical Properties

PipeCastFlexProperty2.png